Advertisement

Next-generation steel and metal alloys are a step closer to reality, thanks to an international research project involving a University of Queensland scientist.

The work could overcome the problem of hydrogen alloy embrittlement that has led to catastrophic failures in major engineering and building projects.

UQ Centre for Microscopy and Microanalysis Director Professor Roger Wepf says the problem had been recognized for almost 140 years.

“The current generation of these metals can suffer hydrogen embrittlement, where they become brittle and fracture due to the accidental introduction of hydrogen during manufacture and processing,” he says.

“A major example of alloy embrittlement occurred in 2013, when bolts in the eastern span of the San Francisco-Oakland bridge failed tests during construction.”

Wepf says hydrogen was extremely volatile and diffused quickly.

“Our research collaboration has, for the first time, localized and visualized hydrogen in steels and alloys,” he says.

“This is essential for the development of new alloys with greater endurance.”

“We have shown that it’s possible to localize hydrogen at atomic resolution — at the scale of a single atom — or at a nanometer (less than one-billionth of a meter) scale by combining different technologies in a closed and protected workflow.

“These include state-of-the-art cryo electron microscopy freezing techniques, low-temperature sample preparation in a cryo focused ion beam microscope, and inert cryo-transfer.

The research, published in Science, involved scientists from the Oxford and Sheffield universities in the UK and ETH Zurich in Switzerland.

Source: University of Queensland

Advertisement
Advertisement