Automatic Shoe Cover Remover
Shoe Inn’s Automatic Shoe Cover Remover provides a complete system that considers physical space, ability to remove all shoe cover types, and capacity. Two models are available: the ASCR10 and ASCR33. The ASCR10 is for low to medium-volume usage. This 10-gallon capacity model combines the canister and motor in one unit. It holds 100 or more disposable shoe covers, depending on the type of shoe cover used, and can be used with a HEPA filtration bag. The ASCR33 is for medium to high-volume usage with a 33-gallon capacity. It offers HEPA filtration and the canister and motor unit are separate. The canister holds 600 or more disposable shoe covers, depending on the type of shoe cover used.
Industrial Vacuum Cleaner
Nilfisk offers the VHS110 CR cleanroom industrial vacuum cleaner, designed specifically for wet/dry collection in cleanroom environments up to Class 10 (ISO 4). Complete with three stages of filtration, the vacuum safely collects fine dust for operator safety while meeting FDA requirements. A PullClean filter cleaning system comes standard with the vacuum and allows proper filter shaking with no downtime, to ensure optimal cleanroom sanitation. The system can collect over nine gallons of waste in an easy to remove collection container, operating in separate wet and dry modes. GMP designed with AISI304 stainless steel. Monitor for clogged filters and/or diminished performance with an easy-to-use vacuum meter located on the front of the machine.
Booth # 2537
In-Process Control Tablet Tester
Pharma Technology Inc.’s iSeries In-Process Control (IPC) Tablet Tester is suitable for automated sampling and testing of tablets. The module offers analysis capabilities for weight, thickness, diameter and hardness, all in a compact, OEB 3 containment design. Sample tablets are tested for each parameter against pre-programmed recipes which include T1, T2 and out of plausibility values. All results and statistics are displayed on a large touchscreen and automatically printed onto a detailed PDF report. The tester can be integrated with tablet presses or advanced Manufacturing Execution Systems. Dust or tablet fragments are separated from the production stream, resulting in uninterrupted manufacturing that can last several days rather than a few hours.
Cleanroom Foam Swabs
Super Brush LLC offers a range of foam swabs, made in the U.S., under ISO 9001 and 13485 quality standards. With over 3,000 styles of foam swabs from Nano-tips to Tube Swabs, there are technically advanced solutions for a variety of cleaning or application challenges. The foam swabs are available in a multitude of configurations and dimensions to access even the most difficult to reach areas. Available with polyurethane foam mitts ranging in size from 1.7mm to 50 mm in diameter and with handle lengths up to 2.5 meters, they are non-abrasive and absorbent, and do not leave lint behind like cotton swabs. Custom design and development is also available.
Valutek’s Nanotek PVC Shoe Cover is offered in custom sizing for a better and safer fit. Its engineered waffle pattern sole makes it slip-resistant and durable against tacky mats. The cover is durable enough to be worn up to five days with proper care. Avoid the costly laundry fees of re-usable shoe covers with this model.
Table Top Powder Filler
The PF2 Table Top Powder Filler from Cozzoli Machine Co. will fill 50 mg to 75 grams of powder in a single dose, with an accuracy of up to +/- 1 percent of fill volume. Output speeds of 30 containers per minute can be achieved based upon operator dexterity, and fine tuning fill-volume adjustments can be made on the fly without tools. The system’s powder pathway is completely enclosed with no abrading parts to ensure zero powder contamination. When the dosing process is completed, a brief high pressure pulse cleans residue powder from within the dosing chamber and filter, directing it into the container, preventing product waste. This innovative filling process operates on a principle requiring no scraper blades or particle-generating components that could contaminate sensitive sterile products.
Sporicidal Disinfectant and Cleaner
PeridoxRTU by Contec is a broad spectrum EPA-registered sporicide, bactericide, virucide, tuberculocide, and fungicide disinfectant which contains no alcohol or bleach. Peridox disinfectant and hard surface cleaner has a 3-minute Sporicidal claim, a 2-minute virucidal and bactericidal claim, and a 1-minute fungicide claim with a chemistry that leaves minimal residue on surfaces. With its short kill times and powerful wetting agents, the solution stays wet and works faster, and offers assured efficacy against hard-to-kill spores and other dangerous pathogens. It is suitable for killing fungi on non-porous surfaces in 1 minute and on porous surfaces in 10 minutes. The solution can be used for daily and monthly required cleaning procedures, it will not damage stainless steel or clothing, and is compatible with most surfaces found in ISO cleanrooms including isolators, floors, walls, and ceilings.
Limited-Use Protective Apparel
Valumax’s line of limited-use, protective apparel features custom-developed materials and breathable nonwovens designed to provide maximum personal protection and contamination control without compromising comfort or range of movement. The apparel line encompasses coveralls, lab coats and jackets, scrubs and gowns, shoe and boot covers, gloves, masks, wipes, and other products with hundreds of styles available in a wide range of sizes to assure proper fit and protection. A variety of color choices are available for limited-use apparel. Sterilization and film bags, autoclavable bowl covers, equipment covers, and accessories are also included. The company's cleanroom products meet ISO Class Levels 3 through Class 8, and its ExtraSafe lab coats meet OSHA requirements for fluid resistance.
Aseptic Filling, Stoppering and Capping Machine
NJM Packaging offers the Dara SX-310-PP/D aseptic filling, stoppering and capping machine for vials. The system can be equipped with stainless steel or ceramic rotary piston pumps or peristaltic pumps that utilize “single use” tubing. Featuring fully servo-driven automation and a compact footprint, the system offers accurate filling and precise stoppering and capping. It is low maintenance, achieves fast and easy changeover and has simple set-up for adding new container sizes in the future. For sterile or cleanroom applications, the SX-310-machine/D can be equipped with a laminar air flow, open or closed restricted access barrier system, or a high containment isolator system. Optional clean-in-place, sterilization-in-place, or gas flushing are also available.